Unfortunately release notes are not published since version 1.1.0. Below is all since the last publication. Detailed descriptions of new features are included in the feature descriptions.
New in this version:
1 = Alternative Demo Mode – This Demo Mode is using saved favourites as source .
2 – PIN Code protection – This feature can be used to avoid access to the TiMe settings by unauthorised person (usefull) when TiMe is placed in a public area.
3 – Delete Last Favourite – It is possible to delete the last stored Favourite.
4 – Delete All Favourites – The entire Favourite list can be deleted.
5 – The Colours and Modes of stored favourites can be changed.
6 – You can choose how TiMe starts up after power loss, Last Settings or Default Settings.
Last settings means, everything is exactly as before power loss.
Default settings means, all settings is the same as first time power up. Only Time Zone settings are not affected.
Improved in this version:
1 – When you open the TiMe App, the new Start page is the scan screen. Here you can search for TiMe devices to connect to.
After you press “SCAN”, all available TiMe devices are showed. Other close-by Bluetooth devices are filtered-out from the list and are not visible.
2 – After the connection is established and you press the “Home” button, the Time and Date will be automatically synchronised with your cellphone, and the Main menu page will be opened.
If the Pin code feature is enabled you are required to type the PIN code first, before the Clock sync can be done. Default PIN code is “1234”
In the top of the Home page you will see the TiMe status (synced or not). In case the sync failed you can repeat it in Time and Date settings.
The option Sync with your cellphone is removed from the Home Screen, but still available in the “Time & Date Settings” Tab.
3 – All the App pages will fit now properly on every Android or iPhone/iPad screen without any distortion, except the iPhone SE 1st generation.
To accomplish this the Home page is now scrollable.
4 – The pages setup is more logically grouped. Some functions are moved to another page.
5 – In the “Time & Date Settings Tab”, switches which are not relevant are disabled until they are needed.
Examples:
“Date Display Second” and “Date Display Interval” settings, are only enabled when the “Date display On/Off” switch is “On”.
The “Daylight Saving Time” switches are only enabled when the associated “Select Time Zone” switch is “On”
6 – In the “Demo Mode Settings” Tab, the Switches “Col”, “Mod” and “Bcol” to select the associated Colors and Modes are only enabled when the “Demo Mode” is “On” and Alt Demo Mode is “Off”.
The “Interval” and “Duration” switches are only enabled when de “Demo Mode” or the “Alt Demo Mode” is on.
“Alt Demo Mode” can be on only when “Demo Mode” is on and a minimum of 2 Favourites is saved.
7 – In general, in some pages is (scrollable) text implemented with explanations about the associated function.
8 – The Tab “Favourites & Templates” contains its associated functions only including explanations.
Last or all Favourites can be deleted here, but it asks the user to confirm by pressing “Continue” or “Cancel”.
9- The Tab “Brightness Settings” contains its associated functions only. Plus LED Test.
The Max “Brightness” and “Min Brightness” switches are only enabled when the “Auto Brightness Control” is on. and the LED Test is off. The “Auto Brightness Control” switch is disabled too when the LED Test is on.
10 – In the Tab “General Settings”, the “Reset” and “Init” function asks the user to confirm by pressing “Continue” or “Cancel”.
Bug fixes in this version:
1 – In the “Time & Date Settings” Tab, the wheel choosers to select “Date Display Second” and “Date Display Interval” previously showed the default positions which does not represent the actual setting when the page was opened (Resolved)
Actual positions will be displayed now when the paged is opened.
2 – In the “Demo Mode Settings” Tab, the wheel choosers to set the “Interval” and “Duration”, previously showed the default positions which does not represent the actual setting when the page was opened. (Resolved)
Actual positions will be displayed when the paged is opened.
3 – In the Tab “Status” was an incorrect value displayed. (Resolved)
4 – There was an error in the calculation of the Target Time Zone which in some situations could result in a wrong value for the Target Time Zone (Resolved)
Leave a Reply