Category: TiMe Features
-
Minimum Brightness (3.24)
For Advanced Users: For the Automatic Brightness Control, the Minimum Value within the selected range can be adjusted between 10-50% on the “Brightness” {age. Consult the Bluetooth User Manual how to use it.
-
Show TiMe Info (3.25)
You can display the TiMe Identity which contains following information: Use “Info” button in the “General Settings” Page. This is a Single Command.
-
Show TiMe Settings (3.26)
You can Display the Current Settings, it will show you all the Current Parameter Values.Use “Status” button in the “General Settings” Page This is a Single Command. Use “Display” button in the “General Settings” Page This is a Single Command.
-
Set to Last Settings (3.27)
You can return to the last used Settings, even if the Power was interrupted.Use “Last Settings” button in the “General Settings” Page This is a Single Command and it requires confirmation.
-
Set to Default Settings (3.28)
You can return to the Default Settings; this is the Settings used after first time Power-up.Only Timezone Settings will not be affected.Use “Default Settings” button in the “General Settings” Page This is a Single Command and it requires confirmation.
-
Reset TiMe (3.29)
You can Reset TiMe,It will startup in the Last Saved Setting (default) or in Default Setting. It depends the “Start-up” preference Setting.Use “Reset TiMe Unit” button in the “General Settings” Page This is a Single Command, and it will be performed after 5 seconds. This command requires confirmation.
-
Init TiMe (3.30)
You can Init TiMe, this is return to Factory Settings.All Manual Changes will be erased, as well as the saved favorites.The Build-in Clock and Bluetooth Modules will be initialized.Time and Bluetooth ID are not affected.Use “Init TiMe Unit” button in the “General Settings” Page This is a Single Command, and it will be performed after…
-
Pincode Protection (3.31) (SW version 6.3 or higher)
For Advanced Users: If your TiMe device is located in a public area, it might be usefull to activate the Pincode Protection Feature. Default Pincode Protection is off. Once you activated Pincode Protection, you need to input the correct Pincode to get access every time you want to connect.After disconnection you have 1 minute to…
-
TiMe Features (2)
This Version 3 of the manual is only valid if you have “TiMe” Software Version 6.0 or higher.For lower Software Versions you need Manual Version V2_0_1, also still available in PDF format on this website. “Time” is never boring, and you cannot avoid watching it all the time. You have been warned; It is a…